Ghd compatible R8 100ohm resistors for ghd 4.0, 4.1 and 4.2 straighteners.

100ohm R8/ melf resistors suitable for the 4.0, 4.1 and early 4.2 range of ghd straighteners including the SS4.

If your straighteners have only 1 resistor (R8) rather than the 2 (R8 / R11) found on the later models then this is the correct resistor. If you are unsure please contact us.

Please note that some of the PCB's Have a flat R8 resistor, if this is the case it is perfectly acceptable to solder this over the top. Again if unsure please contact us.

PLEASE SEE OTHER LISTINGS FOR 47 / 50 OHM RESISTORS